IP Intercom System

SIP-Enabled IP Indoor Intercom
  • SIP-Enabled IP Indoor Intercom Diagram
  • SIP-Enabled IP Indoor Intercom
  • SIP-Enabled IP Indoor Intercom
  • SIP-Enabled IP Indoor Intercom
Proudly Made in the USA Commercial Integrator 2016 Best Winner Wireless Mic Now Available!

SIP-Enabled IP Indoor Intercom System

Surface mount SIP Enabled IP Indoor Intercom with paging horn speaker functionality

Single Button: $199


2-Button: $199


The SIP-Enabled IP Indoor Intercom is a low cost, small, surface mount IP intercom with one or two button versions, powered via Power-over- Ethernet (PoE). Can be used to broadcast alerts and announcements from public address systems using voice over IP (VoIP), or function as an apartment SIP intercom for unlocking a remote door. It can also play background music.

In addition to these features, the SIP-Enabled IP Indoor Intercom can configure one of its buttons to act as a panic button, with added functionality to reduce the number of panic button false alarm calls. With this advanced functionality, a brief button press places a call to one preconfigured number in normal intercom mode—such as a front office phone—while a longer press-and-hold will place a call to a second, preconfigured emergency number.

Each SIP-Enabled IP Indoor Intercom also has an onboard relay, enabling centralized or local control of a door lock or other options such as a strobe.

Programming the SIP-Enabled IP Indoor Intercom is simple, and LED feedback on the intercom lets installers know when their system is up and running. Auto-configuration solutions for both option 66 and option 150 are included in the firmware for fast and efficient system initialization and maintenance of large numbers of intercoms for site wide management.

With simple installation and programming, advanced functionality and reduced labor and installation costs, the Wahsega SIP-Enabled IP Indoor Intercom is the perfect solution for a wide range of applications.


  • Surface mount installation
  • SIP compliant with for both PBX and peer-to-peer capabilities
  • Environmental noise suppression
  • Full-duplex audio with Acoustic Echo Cancellation (AEC)
  • Multicast audio paging with multiple priority levels
  • Fully configurable via simple webpages
  • Top and side raceway knockouts
  • Integrated status LED
  • Integrated microphone
  • Industry-leading low standby power
  • PoE 802.3af enabled
  • Web-based mic & speaker volume control
  • On-board relay for door control
  • Option 66 and option 150 auto-configuration
  • Able to drive internal or external speaker or line out to amplifier
  • Panic button configurations with advanced functionality for fewer false alarm triggers

Get Detailed Pricing

There was an issue with your submission. Please try again.

Thank you for contacting us. A member from our team will be with you shortly.

  • Ethernet: 10/100 Mbps
  • Power Input: PoE (Power-over-Ethernet) 802.3af
  • Protocol: SIP RFC 3261 compatible
  • Audio Codecs: G.711, G.726 (16/24/32/40kbps), G.722, DVI4 (narrow/HD/Ultra HD), Linear PCM, iLBC, Speex, SILK
  • Audio Sampling: Up to 16KHz
  • Speaker Drive Capabilities: 4W
  • Speaker Impedance: 8Ω
  • Speaker Sensitivity: 96dB 1W/1M SPL
  • Form C (SPDT) Relay Contact Closure Rating: 30VDC or 270VAC, 3A
  • Max PoE Cable Length: 100m (per standard) PoE 10/100 cable length
  • Max Cable Length for optional horn speaker: 20ft
  • Temperature Range: -40°C to +85°C
  • Dimensions: 4.3” x 4.8” x 1.94”
  • Construction: 14-guage steel housing and faceplate with white polyester powdercoat paint
  • Regulatory Compliance: FCC Class B
  • Warranty: 2 years limited


      Latest Version

      Release DateVersionDownloadDescription
      June 26, 20172.4.4LinkFirmware for the SIP-Enabled IP Indoor Intercom

      Previous Versions

      Release DateVersionDownloadDescription
      June 25, 20172.4.3LinkFirmware for the SIP-Enabled IP Indoor Intercom
      June 20, 20172.4.2LinkFirmware for the SIP-Enabled IP Indoor Intercom
      May 30, 20172.4.1LinkFirmware for the SIP-Enabled IP Indoor Intercom

      How to Upgrade Firmware